EasAlign
Westfire Stair Parts Logo

View Basket
[Home Page] [Wall Brackets] [Wood Accessories] [Stair Fasteners] [EasAlign]

EasAlign
img_main

What is EasAlign?

EasAlign is a revolutionary, patent pending way to join handrails and provides aesthetically superior joints and higher efficiency than traditional rail bolt installations.

EasAlign uses an efficient fastening method.

EasAlign uses the unique Invis® fastening system of active and passive elements, which are installed into handrail parts. These elements are then magnetically fastened with a unique Actuator tool. Gone are the days of frustration and fumbling with rail bolts, wrenches and plugs required of inferior traditional rail bolt installations.

The beauty of EasAlign is in the connection
compare_new

With EasAlign you get strong, evenly aligned connections that eliminate unsightly railbolt plugs and require less sanding than labor intensive traditional rail bolt installations.

EasAlign allows for baluster placement at the joint.

The EasAlign system installs in the upper half of the handrail.  This will allow one to position the balusters in the vicinity of the connections—unlike rail bolts which are installed in the lower half of handrails where they interfere with the positioning of balusters. If you are an experienced installer you will be very familiar with this problem when installing balusters near a rail bolt joint. With EasAlign, you will appreciate not having to deal with this problem.



Superior installation efficiency.

EasAlign allows for quicker, more accurate onsite installations than ever before. And now, for the first time ever, greater efficiency can be achieved by performing EasAlign installations off-site, then reassembled again on-site due to the unique Invis fastening system—a process not achievable with rail bolt installations.

 

EasAlign comes as a complete kit
package

The complete EasAlign kit is only available from Crown Heritage and has everything you need to get started:

    • · Hard polycarbonate carrying case
    • · 5 Alignment tools to fit all Crown Heritage handrail profiles
    • · Actuator
    • · 2 Bushings
    • · 30 Invis active elements
    • · 30 Invis passive elements
    • · 30 Wood stabilizer dowels
    • · Screws
    • · 1 T-handle driver/torque wrench
    • · 2 Wrench bits
    • · 12mm drill bit